IBM 19 - Manual (Page 146)

Administration/Startup Options/Do Start Page
This option allows you to enable and disable the start-up page.
Choices are yes and no. The factory default is yes.
Administration/Startup Options/Do Sys Start
If you have a hard disk and Do Sys Start is enabled, whenever the
printer is turned on, the controller checks the hard disk for a
SYS\START file and executes this file. Choices for Do Sys Start
are yes and no. The factory default is yes. More information on
creating a SYS\START file is available in the QMS Crown
Technical Reference (an optional manual available from your QMS
vendor) and from Q-FAX. See appendix A, “QMS Customer
Support,” for information on Q-FAX.
Administration/Startup Options/Do Error Handler
When this option is enabled, if a PostScript error occurs during a
PostScript print job, a page is generated reporting the error. This
information is used by QMS technicians (or users familiar with
Select
Previous Previous Next
ADMINISTRATION
STARTUP OPTIONS
STARTUP OPTIONS
DO START PAGE
STARTUP OPTIONS
DO SYS START STARTUP OPTIONS
DO ERROR HANDLER
Fig. 4.9 Startup Options Submenu
Chapter 4
4 - 4 0 P r i n t e r C o n f i g u r a t i o n
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500