IBM 19 - Manual (Page 47)

5. Grasp the tab on the top of the developer cartridge. Pull the
tab and attached clear tape straight up and out of the cartridge,
making sure the tape comes completely out (fig. 2.9). Then,
discard the tab and tape.
6. Locate the toner cartridge that matches the color of the
developer cartridge just installed, and remove it from its
protective bag. (Toner cartridges are color-coded—black,
cyan, magenta, or yellow—on the top.)
Fig. 2.9 Remove Sealing Tape (rear view)
Chapter 2
I n i t i a l P r i n t e r S e t u p 2 - 1 5
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500