IBM 19 - Manual (Page 228)

gear on the left end of the fuser unit to access all sides of the
rollers.
3. Close the paper exit unit.
Cleaning the Paper-Feed Roller and the Manual-
Feed Belts
Clean the paper-feed roller and the manual-feed belts every 20,000
copies or 12 months, whichever comes first, to prevent misfeeds
and jams. This is roughly the same time schedule as replacing the
OPC belt cartridge and cleaning the other rollers, so you may want
to do all of these procedures at the same time.
You need a lint-free cotton cloth, lightly dampened with water, to
perform this procedure. To clean the rollers
Fig. 6.20 Clean the Fuser Exit Rollers
Chapter 6
6 - 3 8 C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500