IBM 19 - Manual (Page 338)

5. Remove the jammed media by pulling it straight out from
above the transfer unit (fig. 9.11).
6. Close the transfer unit, and then the back cover.
7. Close the pressure release lever on the fuser unit.
8. Close the paper exit unit.
When the control panel message window displays IDLE , the
printer is ready to print.
Fig. 9.11 Remove the Jammed Media
Chapter 9
9 - 1 6 T r o u b l e s h o o t i n g
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500