IBM 19 - Manual (Page 42)

4. Remove the two polystyrene inserts from the top cover of the
printer.
5. Remove all packing tape from the exterior of the printer.
6. Grasp the front end of the top cover and lift it up to remove it
(fig. 2.5). Then, set the cover aside for now.
7. Remove the two polystyrene shipping spacers from inside the
printer.
Fig. 2.5 Remove the Top Cover (front view)
Chapter 2
2 - 1 0 I n i t i a l P r i n t e r S e t u p
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500