IBM 19 - Manual (Page 91)

Making the Connection
CAUTION: If you’re connecting the printer to a single computer,
turn off both systems first.
1. At back of the printer, attach one end of the cable to the
appropriate port.
Parallel users: Connect the 36-pin end of the cable to the
printer port labeled “parallel,” and close the clips.
Serial users: Connect the male end of the cable to the printer
port labeled “serial,” and tighten the screws.
NOTE: The port covered with a metal bracket is the SCSI port,
which is used for connecting external hard disks.
Fig. 3.2 Parallel Ports
Fig. 3.3 Serial Ports
Chapter 3
C o n n e c t i n g t h e P r i n t e r 3 - 1 1
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500