IBM 19 - Manual (Page 229)

1. Turn off the printer and remove the power cord and all
interface cables.
2. Remove the media cassette.
3. Reach into the back of the cassette slot and locate the roller:
it’s on the top of the slot at the rear (fig. 6.21).
4. Use the damp cloth the wipe the roller. Rotate the roller so
that the entire surface is cleaned.
5. Locate the manual-feed platform: it’s a black plastic tray at
the top of the cassette slot (fig. 6.21).
Fig. 6.21 Locate the Manual-Feed Platform
Chapter 6
C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e 6 - 3 9
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500