IBM 19 - Manual (Page 328)

Clearing Media Jams
When a jam occurs, the message window on the control panel
displays one of three messages,
MISFEED JAM , INNER JAM,
or OUTER JAM . The following sections contain procedures for
clearing each type of jam.
Clearing Misfeed Jams
When the control panel message window displays MISFEED
JAM, media has jammed while leaving the media cassette or the
manual feed tray. To clear this jam, use the following procedure:
1. Pull out the media cassette (fig. 9.1), and check the
media-cassette slot. If media is there, skip to step 4. If not,
continue to step 2.
Fig. 9.1 Remove the Paper Cassette
Chapter 9
9 - 6 T r o u b l e s h o o t i n g
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500