SMC Networks ARM PL241 - Manual (Page 11)

Preface
ARM DDI 0389B Copyright © 2006 ARM Limited. All rights reserved. xi
Appendix A Signal Descriptions
Read this appendix for a description of the AHB MC input and output
signals.
Glossary Read the Glossary for definitions of terms used in this manual.
Conventions
Conventions that this manual can use are described in:
• Typographical
• Timing diagrams on page xii
• Signals on page xii
• Numbering on page xiii.
Typographical
The typographical conventions are:
italic Highlights important notes, introduces special terminology,
denotes internal cross-references, and citations.
bold Highlights interface elements, such as menu names. Denotes
signal names. Also used for terms in descriptive lists, where
appropriate.
monospace Denotes text that you can enter at the keyboard, such as
commands, file and program names, and source code.
monospace Denotes a permitted abbreviation for a command or option. You
can enter the underlined text instead of the full command or option
name.
monospace italic Denotes arguments to monospace text where the argument is to be
replaced by a specific value.
monospace bold Denotes language keywords when used outside example code.
< and > Angle brackets enclose replaceable terms for assembler syntax
where they appear in code or code fragments. They appear in
normal font in running text. For example:
• MRC p15, 0 <Rd>, <CRn>, <CRm>, <Opcode_2>
• The Opcode_2 value selects the register that is accessed.