SMC Networks ARM PL241 - Manual (Page 69)

Programmer’s Model
ARM DDI 0389B Copyright © 2006 ARM Limited. All rights reserved. 3-9
Table 3-4 lists the register bit assignments.
3.3.4 SMC Clear Configuration Register at 0x100C
The write-only smc_memc_cfg_clr Register enables the memory controller to be
moved out of the Low-power state, and the interrupts disabled. This register cannot be
written to in the Reset state. Figure 3-9 shows the register bit assignments.
Figure 3-9 smc_memc_cfg_clr Register bit assignments
Table 3-5 lists the register bit assignments.
Table 3-4 smc_memc_cfg_set Register bit assignments
Bits Name Function
[31:3] - Reserved, undefined. Write as zero.
[2] low_power_req b0 = no effect
b1 = request the SMC to enter Low-power state when it next becomes idle.
[1] - Reserved, undefined. Write as zero.
[0] int_enable0 b0 = no effect
b1 = interrupt enable, memory interface 0.
    
LQWBGLVDEOH
5HVHUYHG
ORZBSRZHUBH[LW
8QGHILQHG
Table 3-5 smc_memc_cfg_clr Register bit assignments
Bits Name Function
[31:3] - Reserved, undefined. Write as zero.
[2] low_power_exit b0 = no effect
b1 = request the SMC to exit Low-power state.
[1] - Reserved, undefined. Write as zero.
[0] int_disable0 b0 = no effect
b1 = interrupt disable, memory interface 0.