2 media card, 3 interface cards, Uni card – Samsung OFFICESERV 7100 User Manual

Page 14: 4 daughterboard modules, 4dlm, 4slm, Interface cards, Daughterboard modules

Advertising
background image

Note: An additional 16 MGI channels can be added to the system if necessary by installing an MGI16 card.

The MP10a also provides various common resources (standard equipment) that are shared through the system.
The MP10a provides the following: background music/music on hold audio inputs (radios, digital announcers,
etc.), external paging audio output, loud bell audio output, common bell and programmable dry contact closures.
Other common resources embedded on the MP10a are as follows:

2.2.2 MEDIA CARD

An OfficeServ 7100 system must have a media card installed in the MEDIA CARD slot in the main control proces-
sor (MP10a).The media card type is an SD card.The media card contains the operating system, a backup customer
database and voicemail messages to supplement the database stored in the NAND Flash.

Note: The SD media card has a write protect switch that will prevent a backup if in read only position.

2.3 INTERFACE CARDS

UNI CARD

These cards provide the interface connections for telephone lines and stations to the KSU. These cards fit into the
universal card slots to configure the system as required.

The UNI card can be installed in any of the two universal slots of the OfficeServ 7100 system. The UNI card is used
to accommodate other optional daughter boards. Any combination of the 4DLM, 4SLM or 4TRM modules can be
installed in any of the three slots on the UNI card for a total of 12 ports per UNI card. This type of slot configura-
tion allows the customers to grow or expand in 4 port increments. Customer can start out and configure the sys-
tem as a 4 line by 8 station system and later expand to a 8 by 16 configuration and beyond.

Each slot can be used as a voice trunk line board or voice station board depending on the mounted option board.
If a 4TRM option board is mounted in the UNI board, it operates as a voice trunk line board. If 4SLM and 4DLM
option boards are mounted, it operates as a voice station board. The UNI card is not hot swappable. This card can
not
migrate to the OfficeServ 7200 or OfficeServ 7400 systems
.

See installation manual for details.

2.4 DAUGHTERBOARD MODULES

4DLM

This daughter module is a four circuit digital station interface card that provides 1B+D service for the different
models of Samsung digital keyset. The 4DLM can be inserted in any of the three slots on the UNI card or on the MP10a
card.

See installation manual for details.

4SLM

This daughter board module is a four circuit analog station interface for industry standard single line telephones
that require operation of an industry standard message waiting lamp with a voltage range of 85~96 VDC.The card

2.2

Two contact relays

Six 5 party conference circuits

Eight Caller ID sender/receivers

Eight DTMF receiver/transmitters

Eight MGI channels (Licensed IP phones, IP trunks
and IP networking)

Four Voice Mail/Auto Attendant ports

8 Executive MOBEX DSPs (detect DTMF dialing
during Executive Mobex calls).

8 Media Proxy Service Channels (provide connec-
tion between VoIP telephones and SIP trunks with-
out the need for an MGI channel).

Home Page

Table of Contents

Advertising