Simrad AUTOPILOT SYSTEM AP50 - Manual (Page 37)

Operation
20221032B
35
2. Manually steer the
vessel by wheel:
or
Non-Follow-Up:
or
or or NFU steering lever.
Follow Up: Both and course knob.
To return from DODGE mode, press one of the following:
DODGE
TURN Selects AUTO mode with the last set course.
AUTO
Selects AUTO mode with the current heading as the set course.
Note ! If using Non-Follow-up or Follow-up steering modes while
dodging, “NFU” or “FU” flash.
Dodging in NAV Mode
DODGE
TURN
A quick press on the
DODGE
TURN
(DODGE/TURN) button activates
dodging.
DODGE
340.
7
Gyro1
N
NEXT WP
SIMRAD
350°
GPS1
CTS
XTE
.023
NM
BPW
DST
225
NM
°M
25
When in DODGE mode, the course displayed as Course To
Steer (CTS) is the boat’s recommended heading. However, the
previous set course is stored by the AP50. When DODGE is
flashing on the display, the AP50 is no longer in control of the
steering and you must either steer the boat manually or take
control using either Non-Follow-up steering or Follow-up
steering. On manual steering, the clutch (or bypass valve) in the
drive unit will be disengaged when dodging. The AP50 will
remain in the DODGE mode until you exit DODGE by a second
press on the
DODGE
T URN
(DODGE/TURN) button or until you select
another mode.
Perform dodging as follows:
1. Press DODGE
TUR N
(DODGE/TURN) button quickly
2. Manually steer the
vessel by wheel:
or
Non-Follow-up:
or
or or NFU steering lever.
Follow-up: Both and course knob.
To return from DODGE mode press one of the following: