Rf300s rudder feedback unit, 10 rf300s rudder feedback unit – Simrad AUTOPILOT SYSTEM AP50 User Manual

Page 59

Advertising
background image

Technical Specifications

20221032B

57

3.10 RF300S Rudder Feedback Unit

Dimensions:........................................................................ See Figure 3-8 and Figure 4-2
Weight: ...................................................................................................... 0.5 kg (1.1 lbs.)
Material: .............................................................................................Arnite T06 200 PBT
Environmental Protection:........................................................................................... IP56
Temperature range:

Operation: ............................................................... –25 to +55°C (–13 to +130°F)
Storage: .................................................................. –30 to +80°C (–22 to + 176°F)

Mounting: .................................................................Horizontal, vertical, or upside down
Cable:................................................................ 10 m (33 ft.) single twisted-pair, shielded
Rudder angle:..............................................................................................................

± 90°

Supply and output:...................................Polarity independent two wire frequency signal

Frequency resolution: ........................... Center: 3400 Hz, 20 Hz/degree of change
Linearity:...........................................................................

± 3° up to 45° of rudder

Transmission link: ...................................... Stainless 350mm (13.8 in.) with 2 ball joints.

Ball joint stud for rudder arm requires 4.2mm diameter hole and 5mm tap.

Figure 3-8 RF300S Rudder Feedback Unit Dimensions

Advertising