Camera id setting – Sanyo VCC-ZM400 User Manual
Page 12
CAMERA ID SETTING
Camera ID setting
Example: Setting the Camera ID to “CAM 1”
1
Use the cursor button (j or l) to move the cursor to
CAMERA ID, and then use the cursor button (d or c) to
change the setting to ON. Then press the SET button.
The CAMERA ID SETTING screen will appear.
2
Use the cursor button (j l d c) to move the cursor to
the letter “C” in the character selection palette, then
press the SET button.
☞
After at least one character is displayed in the ID field,
the carriage return mark (y) will appear at the lower
right corner of the character selection palette. Selecting
this mark between the characters of the field will create
a new line at that place.
3
Use the same steps to select “A”, “M” and “1” from the
palette, then press the SET button.
The characters “
CAM1” appear in the ID field.
1
2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID ON ‚
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-‚
ID ????????????????
-
POSITION SET ‚
PRESET OFF
MENU BACK
ID CAM1????????????
-
Camera ID screen
1
Character selection palette:
By moving the cursor to letters or numbers in this palette,
you can select characters.
Selected characters will appear in the corresponding field
under ID.
2
ID:
When CAMERA ID is set to “OFF”, the 16 characters in the
ID field will all change to “?” but will not be displayed on
the screen. In addition, when the setting is “ON”, “?”
characters will appear on the screen when no ID has been
entered.
3
POSITION:
After characters are displayed in the ID field, moving the
cursor to the POSITION field with the cursor button and
pressing the SET button will display the camera ID on the
normal screen.
4
PRESET:
When this item is turned to ON, the ID fields are cleared
(question marks appear). Use this function when you want
to change the ID.
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-‚
ID ????????????????
-
POSITION SET ‚
PRESET OFF
MENU BACK
1
2
3
4
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
11