Privacy mask setting (privacy mask) – Sanyo VCC-ZM400 User Manual
Page 17
PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD LOCK cancellation
For use when PASSWORD LOCK is ON
1
Press the SET button.
The PASSWORD screen will appear.
2
Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To move the cursor to the next “*” digit.
3
Use the same steps to enter “2”, “3” and “4”, then press
the SET button.
“
OK” will appear and BACK for MENU will be blinking. Press
the
SET button again. The PRIVACY MASK SETTING screen
will reappear and “
OFF” will be blinking for PASSWORD LOCK.
PASSWORD changes
You can change the password with PASSWORD LOCK in either
the ON or OFF setting.
1
Use the cursor button (j or l) to move the cursor to
SET for PASSWORD CHANGE and press the SET button.
The PASSWORD (NOW PASSWORD) screen will appear.
2
Use the cursor button (d or c, j) to enter the current
password (e.g. 1234), then press the SET button.
The PASSWORD (NEW PASSWORD) screen will appear.
3
Use the cursor button (d or c, j) to enter a new
password (e.g. 4321), then press the SET button.
“
OK” will appear and BACK for MENU will be blinking. Press
the
SET button again.
The PRIVACY MASK SETTING screen will reappear.
1
3
PASSWORD
¤¤¤¤ SET ‚
-
MENU BACK
PASSWORD
1234 SET ‚
-
OK
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
1
2
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
(NOW PASSWORD)
**** SET ‚
-
PASSWORD
(NOW PASSWORD)
1234 SET ‚
-
PASSWORD
(NEW PASSWORD)
**** SET ‚
-
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
16