Sanyo VCC-ZM400 - Manual (Page 53)

VIEW SETTING
ZOOM setting
This item is set in the MOTION SETTING screen.
Use the cursor button (j or l) to move the cursor to
ZOOM, then use the cursor button (d or c) to select the
zoom magnification power (e.g. x2).
Available settings: OFF, x1.4, x2, x2.8, x4, x6
Note:
• When a suspicious motion is detected, the camera zooms in
according to the set magnification power. The zoom takes
effect for 5 seconds and then returns to the previous
magnification level.
• The zoom focuses on the center of the screen. If the
maximum optical performance is exceeded, zooming will stop
at maximum magnification.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
INTERVAL setting
This item is set in the MOTION SETTING screen.
Use the cursor button (j or l) to move the cursor to
INTERVAL, then use the cursor button (d or c) to select the
time interval (e.g. 15S).
Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M
Note: When a motion is detected, no other motions will be
detected within the set interval of time.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
MOTION SETTING
SIZE SET ‚
MASKING ON ‚
SENSITIVITY SET ‚
ZOOM OFF
INTERVAL 5S
ALARM SIGN OFF
PRESET OFF
MENU BACK
MOTION SETTING
SIZE SET ‚
MASKING ON ‚
SENSITIVITY SET ‚
ZOOM OFF
INTERVAL 5S
ALARM SIGN OFF
PRESET OFF
MENU BACK
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
52