Sanyo VCC-ZM400 - Manual (Page 14)

PRIVACY MASK SETTING (PRIVACY MASK)
Mask setting
1 Use the cursor button (j or l) to select SET for
PRIVACY MASK, then press the SET button.
The PRIVACY MASK SETTING screen will appear.
2 Use the cursor button (j or l) to move the cursor to
SET for MASK SET and press the SET button.
The MASK NO. SELECT screen will appear.
Note: When PASSWORD LOCK is ON, moving the cursor to
MASK SET and press the SET button to bring up a
password access screen. The password must be entered in
this screen.
3 Use the cursor button (j or l) to move the cursor to a
mask number (e.g. MASK 3), and then use the cursor
button (c) to change the setting to SET. Then press the
SET button.
The MASK 3 SET (POSITION) screen will appear, and SETy
will be blinking. The gray mask will appear in the center of the
screen.
Cursor button operation
OFF: to c side (ON appears), to c side again (SET appears)
• SET: Mask POSITION and SIZE can be set
• ON: Masks can be displayed
• OFF: Masks can be deleted
1 2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
MASK NO.SELECT
MASK 1 OFF
MASK 2 OFF
MASK 3 OFF
MASK 4 OFF
3
MASK NO.SELECT
MASK 1 OFF
MASK 2 OFF
MASK 3 SET ‚
MASK 4 OFF
PRESET OFF
MENU BACK
MASK 3 SET
(POSITION)
SET ‚
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
13