Sanyo VCC-ZM400 - Manual (Page 61)

OPTION SETTING
C Alarm output setting (ALARM OUT)
1
ALARM OUT setting
Use the cursor button (j or l) to move the cursor to
ALARM OUT, then use the cursor button (d or c) to
select “ON” or “ OFF”.
Available settings:
• ON: Output an alarm (for activation of buzzer or lamp)
• OFF: Does not output an alarm
2 POLARITY setting
Use the cursor button (j or l) to move the cursor to
POLARITY, then use the cursor button (d or c) to select
“NO” or “NC”.
Available settings:
• NO: Normal open (Normally open so closed condition is
detected as input.)
• NC: Normal closed (Normally closed so open condition is
detected as input.)
3 ALARM TIME setting
Use the cursor button (j or l) to move the cursor to
ALARM TIME, then use the cursor button (d or c) to
select the amount of time for external alarm output.
Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
1 2 ALARM SETTING
ALARM IN ALM
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
ALARM SETTING
ALARM IN ALM
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
3 ALARM SETTING
ALARM IN ALM
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
PRESET OFF
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
60