Sanyo VCC-ZM400 - Manual (Page 35)

VIEW SETTING ITEM FLOW
(About creating image setting files in VIEW SETTING)
You can set 9 different patterns with view files. Use the cursor
button (d or c) to change the file number (1) for VIEW SETTING
and press the SET button. The selected image setting file will
appear. Neither the mask function nor the motion detector
function can be used with image setting file “0”, so they will not
appear as options in the screen for pattern 0.
Note: When each of the following functions is ON (shown by
single circle), it may be possible to use other functions in
conjunction with it (shown by double circle). View columns
vertically to determine which functions can be used
together.
IRIS AUTO: SENSE UP (activated) F T T T T
MANU: EI (ON) T F T T E
SHUTTER LONG T T F T T
SHORT T T T F E
MOTION T E T E F
F: Function is set T: Not allowable E: Allowable
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
VIEW SETTING 0
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION ---
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
(Screen for image setting 0)
(Screen for image setting 1 – 8)
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
34