Sanyo VCC-ZM400 - Manual (Page 28)

LENS SETTING (LENS)
☞ COLOR mode setting
1 Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2
Use the cursor button (j or l) to move the cursor to
DAY/NIGHT, use the cursor button (d or c) to select
the level setting (e.g. COLOR) and then press the SET
button.
The D/N SETTING - COLOR screen will appear, and the “ ± 0dB”
setting for “AGC MAX GAIN” will be blinking.
1 Sets the maximum AGC gain.
2 Sets the digital noise reduction.
3 AGC MAX GAIN setting
Use the cursor button (j or l) to move the cursor to
AGC MAX GAIN, and then use the cursor button (d or
c) to select the gain.
Available settings: Select the maximum AGC gain from OFF,
–6dB, ± 0dB, +6dB or +9dB.
Setting fixed gain manually
Set AGC MAX GAIN to “OFF” and then press the SET
button.
The GAIN SETTING screen will appear. You can use this screen
to set the gain value manually to within a range of 0 – 30 dB.
Note:
• If “OFF” is selected, no maximum gain will be set.
• If “OFF” is selected, the SENSE UP function will be forcibly set
to “OFF”. However, the setting display will not change.
D/N SETTING - COLOR
AGC MAX GAIN ±0·
DNR OFF
PRESET OFF
MENU BACK
1
2
2, 3
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT COLOR‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
1 MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
27