Sanyo VCC-ZM400 - Manual (Page 29)

LENS SETTING (LENS)
4 DNR setting
Use the cursor button (j or l) to move the cursor to
DNR, and then use the cursor button (d or c) to select
the digital noise reduction setting (e.g. ON).
Available settings:
• ON: DNR (digital noise reduction) is applied. This reduces
interference at low luminance levels.
• OFF: DNR is not applied.
Note:
• Digital noise reduction operates when the gain control
increases. In addition, blurring and ghosting of images can
occur when moving images are being monitored, and so the
resolution is also reduced slightly.
• If AGC MAX GAIN is set to “ OFF”, DNR will be forcibly set to
“ OFF”.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
☞ B/W mode setting
1 Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
4
D/N SETTING - COLOR
AGC MAX GAIN ±0·
DNR OFF
PRESET OFF
MENU BACK
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT B/W ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
1
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
28