Sanyo VCC-ZM400 - Manual (Page 7)

CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables
are sold separately.
1 Make the video signal connection between the camera
and the monitor or time lapse VCR.
2 Power supply choices
• When using a commercially available 24 V AC adaptor,
make sure to use a cable with an earth line (22AWG or
more) to connect to the grounding terminal. (
Fig.1.)
• When using a DC 12 V power supply, make the
connections as indicated in
Fig. 2.
CAUTION:
To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.
3 Insert the plug of this power supply into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
GND AC24V
DC12V CLASS 2 WIR
GND AC24V
DC12V CLASS 2 WIR
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection DC 12 V connection
Fig. 1 Fig. 2
Time lapse VCR or
Digital video recorder
(sold separately)
TV monitor
(sold separately)
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
6