Sanyo VCC-ZM400 - Manual (Page 36)

VIEW SETTING
A IRIS setting
There are 2 possible settings for IRIS, autoiris (AUTO) and manual iris (MANU).
Autoiris setting (AUTO)
Sets backlight compensation, magnification of electronic
sensitivity and iris level.
1 Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (e.g. 1)
The VIEW SETTING 1 screen will appear and AUTO for IRIS will
be blinking.
Available settings:
• AUTO: Sets automatic adjustment of iris.
• MANU: Sets manual adjustment of iris.
Note:
When AUTO is selected, the following 3 types of detailed
backlight compensation settings will be available.
• Multi-spot evaluative metering (MULT)
• 5 spot centerweighted average metering (CENT)
• 48 multi-spot metering (MASK)
2 Press the SET button.
The IRIS SETTING screen will appear.
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
1
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
35