Sanyo VCC-ZM400 - Manual (Page 50)

VIEW SETTING
4 Set the size of the target object desired for detection
1 Determine the vertical size
Tilt the cursor button to the right (c).
The “ V” value (vertical pattern) will change to “2” and the
detection pattern will expand downward. Repeating this
motion will expand the pattern in the up and down
direction. Tilting the cursor button to the left will reduce
the pattern size.
2 Determine the horizontal size
Use the cursor button (l) to move the cursor to the
“1” for “H”, then tilt the cursor button to the right
(c).
The “ H” value (horizontal pattern) will change to “2” and the
detection pattern will expand to the left. Repeating this
motion will expand the pattern in the left and right direction.
Tilting the cursor button to the left will reduce the pattern
size.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
MOTION SIZE
V 1
H 1
PRESET OFF
MENU BACK
MOTION SIZE
V 2
H 1
PRESET OFF
MENU BACK
MOTION SIZE
V 6
H 1
PRESET OFF
MENU BACK
MOTION SIZE
V 2
H 2
PRESET OFF
MENU BACK
MOTION SIZE
V 2
H 3
PRESET OFF
MENU BACK
MOTION SIZE
V 3
H 3
PRESET OFF
MENU BACK
MOTION SIZE
V 1
H 2
PRESET OFF
MENU BACK
MOTION SIZE
V 1
H 3
PRESET OFF
MENU BACK
MOTION SIZE
V 1
H 8
PRESET OFF
MENU BACK
V1, H1 V2, H1 V6, H1
V2, H2 V2, H3 V3, H3
V1, H2 V1, H3 V1, H8
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
49