Sanyo VCC-ZM400 - Manual (Page 34)

VIEW SETTING ITEM FLOW
☞ Setting the VIEW SETTING
Signifies that VIEW
SETTING 1 is the camera
setting 1. The cursor
button can be used (d or
c) to select one of the
nine VIEW SETTING
patterns (0 – 8).
A IRIS setting (See p35)
This setting allows selection of IRIS to either autoiris (AUTO) or manual iris (MANU). Default setting is
autoiris.
B WHITE BALANCE adjustment (See p42)
Three white balance methods are available: auto trace white balance (ATW), one-push automatic
white balance (AWC), and manual white balance (MWB). Default setting is auto trace white balance.
C Electronic SHUTTER setting (See p46)
This setting chooses either a fast shutter speed (SHORT) for target objects that may be moving quickly
or a slower shutter speed (LONG) for darker target objects.
D MOTION detector setting (See p48)
This function generates an alarm when a suspicious figure is detected. Each of the settings will enable
certain kinds of detection based on the natural image (swaying trees, flickers of light, etc.). It is also
possible to enable zooming in on target objects and intruders that have unusual brightness levels
(moving, bright) or are fast-moving.
E Profile compensation setting (APERTURE) (See p54)
This setting emphasizes the target object profile (horizontally or vertically).
F GAMMA correction setting (See p55)
This setting enables contrast sensitivity to be boosted by controlling the gamma characteristics. Three
gamma controls are available: gamma correction (ON), smart gamma correction 1 (SMART 1), and
smart gamma correction 2 (SMART 2). Default setting is ON.
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
A
B
C
D
E
F
☞
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
33