Sanyo VCC-ZM400 - Manual (Page 25)

LENS SETTING (LENS)
☞ AUTO mode setting
Note:
• If the backlight compensation has been set to “MULTI”, the backlight compensation will be canceled when the mode is switched to
B/W.
• If “SENSE UP” has been activated, SENSE UP mode will be activated after the mode switches to B/W mode.
1 Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2 Use the cursor button (j or l) to move the cursor to
DAY/NIGHT, use the cursor button (d or c) to select
the mode (e.g. AUTO), and then press the SET button.
The D/N SETTING - AUTO screen will appear, and the “+9dB”
setting for “AGC MAX GAIN” will be blinking.
1 Sets the maximum AGC gain.
2 Sets the digital noise reduction.
3 Sets burst suppression. If other peripheral devices (such
as a multiplexer) are connected to the system, bursts
(distortion of image color) can occur when switching
between color and black & white. If this happens,
change the BURST setting to “ON”.
4 Sets the focus when switching to black & white mode.
5 Sets the switching level for color mode and black & white
mode. The three available settings are LOW, MID or HIGH.
In addition, the switching level can be set manually (ADJ).
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
1 MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
2
D/N SETTING - AUTO
AGC MAX GAIN +9·
DNR OFF
BURST OFF
FOCUS 1
LEVEL MID
PRESET OFF
MENU BACK
1
2
3
5
4
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
24