Sanyo POA-MD13NET2 - Manual (Page 127)

39
Network Board
OWNER’S MANUAL
ENGLISH
Save a image adjustment value
1
Decide your desired image adjustment
value through the image adjustment
pages “1” to “3”.
2
Display the page “3” and select the
desired image number with the pull-
down menu of the Save Adjustment.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
The Image1 to Image4 are for the user preset modes to store the image adjustment.
The Original Mode is represented the mode that user preset mode Image1 to Image4
is created from the predefined image modes Standard, Real or Cinema.
Load a image mode
Display the page “1” and select a set to
load with the pull-down menu button of
the Image Adjustment Mode and press
the Set button.
Control the Projector