Sanyo POA-MD13NET2 - Manual (Page 47)

47
Network Board
OWNER’S MANUAL [HD Series]
ENGLISH
2 Set a time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes].
3 Select an event “ON” or “OFF”.
Select an event ON or OFF with the pull-down menu button to turn on or off the
projector.
4 Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another
timer event setting.
Check the Timer events
To check the set timer events, click on
the Timer Check button.
Getting the current time
The displayed time is the value set when
the setting page was displayed. This
time value is not updated automatically.
To update the display time click Refresh
button.
Control the projector
v
v