Sanyo POA-MD13NET2 - Manual (Page 129)

41
Network Board
OWNER’S MANUAL
ENGLISH
Setting
This function is to set up the projector. Click on the page number “1” to “5”
linked texts to change the setting pages.
Item Description
Language ..........Changes the on-screen menu
language of the projector.
Keystone............Corrects the keystone distor-
tion of the projected image on
the screen. It moves quickly if
the “High Speed” is checked.
Item Description
Blue Back ..........Switches on or off the blue
images on the screen when no
input signal received.
Display ..............Switches on or off the on-screen
menu display on the screen.
Logo ..................Sets on or off the logo display on
the screen during the startup.
Ceiling................Sets the image top/bottom and
left/right reversed.
Rear ..................Sets the image left/right
reversed.
Item Description
No Show ............Sets the image black out mode.
Freeze................Sets the image frozen mode.
Power
Management......Sets the automatic lamp turn-
off mode if the input signal is
interrupted and no control key
is pressed for 5 minutes and 30
seconds.
On Start ............Sets the power-on mode when
turning on the mains switch.
Lamp Mode........Switches lamp mode 1 lamp or
2 lamps mode, or 2 lamps or 4
lamps mode.
* The displayed items may differ from the actual
depending on the functions of projector you
use.
Control the Projector