Sanyo POA-MD13NET2 - Manual (Page 52)

52
Chapter 4 Controlling the Projector
Load a control set
Select your desired set number with the pull-down menu button of the Load Setting
No. and then click Set button. The setting values of the selected set number are
applied to the current settings.
Example of setting
✐ If the contents of the saved set are not match for the slot equipped on the projector, the
invalid alert message may be displayed. For example, the message “Invalid setting for
INPUT1” will be displayed in the following case.
Example: In case of after setting the DVI computer input for INPUT1 and then it was
changed to video input board.
* The loaded set can be selected from the item "System" (
☞ p. 38).