Sanyo POA-MD13NET2 - Manual (Page 40)

40
Chapter 4 Controlling the Projector
Save a Set
1
Decide your desired Display values through the Display adjustment selection pages
“1”to “2”.
2
Display the page “3” and select a mode number with the pull-down menu button of the
Save to. Type a memo into the Memo text area for simply description of your selected
number.
* Mode1 to Mode15 are for the video input or computer(digital) input, Mode16 to Mode20 are for
the computer (analog) input. ExMode21 to ExMode50 can be stored for any input mode.
* Up to 23 characters can be used for the Memo.
3
Register by clicking Set button.
To restore the adjustments, click Reset button.
* The stored custom setting will be available at the System sub menu.(
☞ p.38)
c
Select a mode by
clicking the button
Type a memo for
the selected mode
* The memos for Mode1 to Mode20 are dis-
played with “Stored” or “Free”. The
memos for ExMode21 to ExMode50 are
can be stored with the input text.