Sanyo POA-MD13NET2 - Manual (Page 34)

34
Chapter 4 Controlling the Projector
✐ The projector is not turned on for about 90 seconds after switching into the standby mode.
After the power status indicator on the control page changes from “On Cooling down” to
“OFF”, then try to turn on the projector with
On button.
✐ The web browser checks and updates the projector's condition every 20 seconds automatically.
Power on/off the projector
Click Power & Status on the main menu. The control page will be displayed.
By clicking On or Standby button on the page, the power of the projector
can be controlled. When you click Standby button, another confirmation popup win-
dow*
1 will appear, and then click OK button if it is set to standby.
This chapter describes controlling the projector via a network using this product.
Display the main menu following to the login procedure described on page 22.
Popup confirmation window