Sanyo POA-MD13NET2 - Manual (Page 89)

Network Board
POA-MD13NET2
OWNER’S MANUAL
INSTALLATION and OPERATION of the Network Board
This Network Board is an optional product to control and set up a projector via a network.
Mount this product to the projector and connect a network cable. By accessing the con-
nected projector using the web browser on your computer, the projector can be con-
trolled and set up remotely.
This product is only used for our projectors that have a terminal for the Network Board.
This manual explains the installation of the Network Board and its operation.
Chapter 1 Preparation
Chapter 2 Installation
Chapter 3 Basic Setting & Operation
Chapter 4 Controlling the Projector
Chapter 5 Controlling the Multi-Projectors
Chapter 6 Use of Serial Port
Chapter 7 Appendix
This network board is an optional product for the
LCD projectors. The control pages and instruc-
tions differ with each projector. See back of this
manual for the projector HD series. Check the
projector's model No. and use proper side of this
owner's manual.
1AA6P1P4381-- IDRM