Sanyo POA-MD13NET2 - Manual (Page 172)

84
Chapter 7 Appendix
Why am I not receiving E-mail alert messages?
Make sure that the registered E-mail address and SMTP server address are cor-
rect. If the SMTP server is located in your LAN (Local Area network), the
address should be set to the SMTP server in your LAN. The SMTP server locat-
ed outside of your LAN may not be available for security reason. For further
information please contact your network administrator (
☞ p.28).
It may be required for the authentication depending on the SMTP server.
This product does not support this kind of SMTP server.
Can I develop a driver to control external serial equipment?
This product does not provide any driver software. To control the external
equipment connected to the extra serial port, it should be required to clarify the
commands and communication condition defined by each equipment. If they
are clarified, it can be controlled by using the Telnet application installed on your
computer. Please see item “Use of telnet” (
☞ p.62).
Can I control the projector by using the telnet application?
Possible. Please refer to item “Control the projector with telnet“ (
☞ p.64).
A
Q
A
Q
Others
A
Q