Sony MDS-W1 - Manual (Page 13)

Basic Operations
Basic Operations
13 EN
With the
label side up
With the arrow pointing this way
Playing an MD
1 Turn on the amplifier and set the source selector to the position
for MD deck.
2 Press 1/u.
The STANDBY indicator turns off.
3 Insert an MD into deck A or deck B.
4 Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Stop playing Press p.
Pause playing Press P. Press the button again or press · to
resume playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the current track Turn AMS counterclockwise (or press = on the
or the preceding track remote).
Take out the MD Press § EJECT after stopping playing.
You can use both decks for
playback.
When using the controls on the
deck
Use the buttons of the deck
containing the MD you want to
play.
When using the remote Z
Press DECK A or DECK B to select
the deck.
Audio output
Output switches automatically to
the audio of the deck which newly
starts playing.
You can also switch the output as
desired by pressing OUTPUT.
z You can start playing with
the track selected in Step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See “Using the Display” on
page 23.
z To use headphones
Connect them to PHONES
jack. Use PHONE LEVEL to
adjust the volume.
Selects the deck
(A or B) for which
sound is to be
output.
PHONES
§ EJECT § EJECT
STANDBY
PHONE LEVEL
OUTPUT
REC
p
0 ) r
· P P
PUSH ENTER PUSH ENTER
CLEAR CLEAR
REC
0 ) r
≠ ± AMS YES
DISPLAY
A-INPUT
A TIME/CHAR
TIMER
B-INPUT
B TIME/CHAR
MENU/NO
p ·
A B
≠ ± AMS YES MENU/NO
RELAY MD SYNC
2 3
4