Sony MDS-W1 - Manual (Page 7)

Basic Operations
Basic Operations
7 EN
With the
label side up
With the arrow pointing this way
Recording on an MD
1 Turn on the amplifier and play the program source you want
to record.
2 Press 1/u.
The STANDBY indicator turns off.
3 Insert a recordable MD into deck A or deck B.
If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.
(Continued)
Basic Operations
You can record on both decks.
Use the buttons for the deck
containing a recordable MD.
To record on deck A and deck B
at the same time, see page 8.
z You can easily perform
Synchro-Recording from deck
A to deck B
See “Dubbing an MD” on
page 11.
Audio output
Output switches automatically to
the audio of the deck newly set to
recording standby.
You can also switch the output as
desired by pressing OUTPUT.
Selects the deck
(A or B) for which
sound is to be
output.
PHONES
§ EJECT § EJECT
STANDBY
PHONE LEVEL
OUTPUT
REC
p
0 ) r
· P P
PUSH ENTER PUSH ENTER
CLEAR CLEAR
REC
0 ) r
≠ ± AMS YES
DISPLAY
A-INPUT
A TIME/CHAR
TIMER
B-INPUT
B TIME/CHAR
MENU/NO
p ·
A B
≠ ± AMS YES MENU/NO
RELAY MD SYNC
2 9 5,8,10,13 9
14
4
6,7,11,12 14
5,8,10,13