Sony MDS-W1 - Manual (Page 35)

Editing Recorded MDs
35 EN
Combining Recorded Tracks
(Combine Function)
Use the Combine Function to combine tracks on a
recorded MD. The two tracks to be combined need not
to be consecutive and the latter track to be combined
can be the track which comes before the former one in
the track number order. This function is useful for
combining several songs into a single medley, or
several independently recorded portions into a single
track. When you combine two tracks, the total number
of tracks decreases by one and all tracks following the
combined tracks are renumbered.
Example: Combining B and D
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display EDIT menu.
2
Turn AMS to select “Combine”, then press AMS
or YES.
(Continued)
4
While monitoring the sound, turn AMS to find the
point to divide the track.
You can select the unit (“f”, “s” or “m”) by which
the point to divide the track is shifted.
Press 0 or ) to select frame “f”, second “s”, or
minute “m”, then turn AMS to change the point to
divide the track.
5
Press AMS or YES when the position is correct.
“Complete
” appears for a few seconds and the
newly created track begins playing. The new track
will have no track title even if the original track
was labeled.
To cancel the Divide Function
Press MENU/NO or p.
z
You can undo the Divide Function
Use the Undo Function immediately after you divided
the track (see page 41).
z
You can divide a track while recording
Mark the track numbers manually or use the Level
Synchro Function (see page 17).
Dividing a track after selecting the dividing
point
1
While playing the MD, press AMS at the point
where you want to create a new track.
“–Rehearsal–” appears in the display and playback
continues from the position you selected.
2
To make fine adjustment on the dividing position,
do Step 4 in “Dividing a track after selecting the
track” on this page.
3
Press YES.
“Complete
” appears for a few seconds and the
newly created track begins playing.
To cancel the Divide Function
Press AMS, MENU/NO or p.
Track
number
Combining
B and D are combined
into one track
≠ AMS ±
p
0 ) r
·
§ EJECT
P
§ EJECT
≠ AMS ±
p
0 ) r
· P
≠ AMS ±
MENU/NO MENU/NO YES YES