Sony MDS-W1 - Manual (Page 30)

Playing MDs
30 EN
Changing the Pitch (Pitch
Control Function)
You can change the MD playback speed (pitch). The
tone rises at higher pitches, and falls at lower pitches.
1
While the deck is playing, press MENU/NO twice
to display SET UP menu.
2
Turn AMS to select “PITCH”, then press AMS.
3
Turn AMS to change the pitch within a range of
–98.5% to +12.5% (in 0.1% steps), then press AMS.
When you press CLEAR, the setting returns to the
initial value (0%).
4
Press MENU/NO.
Notes
• When you change the pitch, the playback sound drops out
momentarily.
• The pitch setting returns to the initial value (0%) when
you turn off the deck or eject the MD.
Notes
• The display shows “- -m - -s” instead of the total playing
time when the total playing time of the program exceeds
199 minutes.
• “ Program Full” appears when you program over 25
tracks. Erase the unnecessary tracks to enter other tracks.
Changing the track order
You can change the order of the tracks in your
program before you start playing.
To Do the following procedure
after Steps 1 and 2 in
“Creating Your Own
Program”:
Add a
track
Press 0 or ) until the track
number you want to erase
flashes, then press CLEAR.
Keep pressing CLEAR until all
programmed track numbers
disappear.
1 Press 0 until “ ” (cursor)
flashes at the left of the first
track.
2 Do Steps 3 to 5 on page 29.
a track
the whole
program
to the
beginning of
the program
Change a track in the
program
in the middle
of the program 1 Press 0 or ) until the
track which precedes the track
to be added flashes.
2 Press AMS so that “ ”
(cursor) flashes, then do Steps
3 to 5 on page 29.
1 Press 0 until “ ” (cursor)
flashes at the right of the last
track.
2 Do Steps 3 to 5 on page 29.
to the end of
the program
1 Press 0 or ) until the
track number you want to
change flashes.
2 Do Steps 3 to 5 on page 29.
Erase
≠ AMS ±
p
0 ) r
·
§ EJECT
P
§ EJECT
≠ AMS ±
p
0 ) r
· P
≠ AMS ±
MENU/NO