Stairmaster 2100 LC - Manual (Page 53)

53
Maintenance
Visually inspect and clean the treadmill regularly. Daily visual inspection should include:
• Inspect the power cord and walking belt for wear.
• Check the position of the walking belt; be sure it is not rubbing against the frame. The
belt should be evenly spaced on the deck within 0.25 inch; adjust if necessary.
• Check optional side handrails to be sure they are fastened securely.
• Remove potential hazards from the treadmill area.
Cleaning
Treadmill and Controller
• Daily: Keep the treadmill and controller free of dust and debris. Use a damp sponge to
wipe the exteriors and walking belt; do not soak surfaces. Dry all surfaces thoroughly.
WARNING
DRY MOP THE DECK UNDER THE BELT ONLY. DO NOT ADD ANY LUBRICANTS.
ADDING LUBRICANTS CAN RUIN THE PROPRIETARY FRICTION-CONTROL
SURFACE.
DO NOT USE DETERGENTS OR CLEANING AGENTS ON ANY PART OF THE DECK.
DO NOT LET LIQUID ENTER THE TREADMILL OR CONTROLLER. IF IT DOES,
THE EQUIPMENT MUST BE INSPECTED AND TESTED FOR SAFETY BY A
STAIRMATER-APPROVED TECHNICIAN BEFORE IT CAN BE USED AGAIN.
• Weekly: Elevate the treadmill to maximum incline and vacuum the floor under it to
prevent excess dust and dirt from interfering with operation.
Treadmill Interior
Depending upon the treadmill environment, dust and or lint can accumulate under the hood.
Periodic internal cleaning should be done by a qualified service personnel.
WARNING
DO NOT REMOVE THE TREADMILL HOOD: DANGEROUS VOLTAGES ARE
PRESENT. COMPONENTS ARE SERVICEABLE ONLY BY QUALIFIED SERVICE
PERSONNEL.