State Industries SHE50-100PE - Manual (Page 10)

8 Servicing should only be performed by a Qualified Service Agent
features and components
front & bacK views
HEATING LOOP
RETURN LINE
CONNECTION
3/4 INCH NPT
DRAIN VALVE
TEMPERATURE
PRESSURE
RELIEF VALVE
FRONT VIEW BACK VIEW
EXHAUST ELBOW
(2 INCH PVC VENT
CONNECTION)
CONDENSATE
DRAIN CONNECTION
BLOCKED EXHAUST
SWITCH SENSING TUBE
HEATING LOOP
SUPPLY LINE
CONNECTION
3/4 INCH NPT
2 INCH PVC
INTAKE AIR
CONNECTION
TOP COVER
ON / OFF SWITCH
UIM
(user interface module)
CONTROL INTERFACE
COVER.
TEMPERATURE
PROBE - LOCATED
BEHIND CONTROL
INTERFACE COVER
TANK GLASSING
PLUG COVER.
USED FOR
MANUFACTURING
PURPOSES ONLY.
DO NOT REMOVE
GLASSING PLUG
FOR ANY SERVICE
OR MAINTENANCE.
COVER MAY BE
REMOVED IF LEAK
IS SUSPECTED.
Figure 3