Symbol Technologies WS 2000 - Manual (Page 108)

Retail Use Cases
she will configure all of the mobile units on this WLAN with the correct ESSID, so she
disallows this option, potentially keeping a cafe customer out of the POS WLAN.
The options for Multicast Addresses are designed for compatibility with some VoIP phones.
Clarisa does not know if the voice handhelds will require it but, even if they do, she will not
know the required multicast addresses until they are purchased and arrive. She leaves the
Multicast Addresses blank.
Setting Subnet Access
Clarisa wants the two internal subnets to have complete access to one another, but she
wants the Cafe subnet to have access only to the WAN.
She selects the Subnet Access node in the left menu.
To set the subnet access for a pair of subnets, she clicks the square for traffic from one
subnet to another and then uses the detail section, which appears below, to determine the
rules for traffic between those two subnets.
She allows the Cafe subnet to have full access to the WAN. For the Cafe subnet to of from
any other internal subnet, she selects the appropriate square, then uses to the detail box
below to Deny all protocols.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 108
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004