Symbol Technologies WS 2000 - Manual (Page 66)

System Administration
6. Specify whether the site is on the WAN or is on one of the subnets associated with the
switch by selecting the appropriate choice from the drop-down menu to the right of the
radio button.
7. Specify the IP address or domain name of the system that has the update file.
8. Specify a Username and Password that will allow the FTP login and access to the
file.
9. Click the Perform Update button to initiate the firmware update for the switch.
10. After the switch reboots, return to the Firmware Update screen. Read the Status
field to verify that the firmware update completed successfully.
11. Confirm that the wireless switch’s configuration settings are the same as prior to the
update. If not, restore the settings. See “Exporting and Importing Wireless Switch
Settings.”
System Configuration
Exporting and Importing Wireless Switch Settings
All of the configuration settings for the WS 2000 Wireless Switch can be saved to a
configuration file and then either imported back into the same switch or transferred to
another switch. This file-based configuration saving feature provides several benefits:
• It can speed the switch setup process significantly at sites using multiple WS 2000
Wireless switches
• It allows an administrator to “backup” the current switch configuration before making
significant changes, before restoring the default configuration, or for precautionary
measures.
Select System Configuration --> Config Import/Export from the left menu to import
or export the switch configuration settings.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 66
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004