Symbol Technologies WS 2000 User Manual
Page 142
Sample Configuration File
set beacon intvl A 100
set rts A 2341
set dtim A 10
set short-pre A enable
set primary A 1
// Default 802.11 B radio configuration
set reg B in/out 1 100
set rate B 1 11
set div B enable
set beacon mode B disable
set beacon intvl B 100
set rts B 2341
set dtim B 10
set short-pre B enable
/
// Access Port configuration
network
ap
delete 1 all
delete 2 all
delete 3 all
/
// LAN configuration
network
lan
set mode 1 enable
set name 1 Subnet1
set ipadr 1 192.168.0.1
set mask 1 255.255.255.0
set mode 2 disable
set name 2 Subnet2
set ipadr 2 192.168.1.1
set mask 2 255.255.255.0
set mode 3 disable
set name 3 Subnet3
set ipadr 3 192.168.2.1
set mask 3 255.255.255.0
// Port To Subnet Map configuration
set port 1 s1
set port 2 s1
set port 3 s1
set port 4 s1
set port 5 s1
set port 6 s1
// WLAN To Subnet Map configuration
set wlan 1 s1
set wlan 2 s2
set wlan 3 s3
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved
142
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004