Symbol Technologies WS 2000 User Manual
Page 81
System Administration
The Information portion of the Subnet Stats screen displays general information about
the subnet.
• The HW address is the Media Access Control (MAC) address of the switch’s WAN
port, which is set at the factory.
• The IP addresses displayed here for the subnet connection are set on the subnet screen
(Network Configuration --> WLAN --> <subnet name> ).
The Received and Transmitted portions of the screen display statistics for the
cumulative packets, bytes, and errors received and transmitted through the WAN interface
since the WAN was last enabled or the switch was last rebooted.
Received Field
Description
RX Packets
The total number of data packets received over the subnet
RX Bytes
The total number of bytes of information received over the subnet
RX Errors
The total number of errors including dropped data packets, buffer
overruns, and frame errors on inbound traffic
RX Dropped
The number of data packets that failed to reach the subnet
RX Overruns
The total number of buffer overruns (when packets are received faster
than the subnet can handle them)
RX Frame
The total number of TCP/IP data frame errors received
Transmitted
Field
Description
TX Packets
The total number of data packets sent over the subnet
TX Bytes
The total number of bytes of information sent over the subnet
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved
81
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004