Symbol Technologies WS 2000 - Manual (Page 92)

Retail Use Cases
And for each subnet:
192.168.**.1 The subnet itself
192.168.**.2 to 192.168.**.10 Static IP addresses
192.168.**.11 to 192.168.**.254 DHCP-supplied IP addresses on the subnet
With this plan, she can begin to configure the individual subnets
Configuring POS Subnet
Clarisa selects the first subnet from the LAN menu items in the left menu.
Clarisa renames this subnet “POSsn”, and then gives it an IP address of 192.168.0.1 and a
subnet mask of 255.255.255.0. The devices on this subnet are:
• Everything on the POS WLAN: wireless POS terminals and wireless handheld terminals
• One wired POS terminal on port 4 and one on port 5
• One in-store server on port 6
Using the Interfaces section of the screen on the right, she associates the first WLAN with
this subnet, as well as Ports 1 (the one the POS WLAN is plugged into), 4 and 5 (the wired
POS terminals), and 6 (the server). She activates the DHCP server and gives it an IP address
range of 192.168.0.11 to 192.168.0.254.
After she enters the Address Assignment Range, Clarisa clicks Advanced DHCP
Server.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 92
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004