Configuring the printer subnet – Symbol Technologies WS 2000 User Manual
Page 93
Retail Use Cases
The Default Gateway is already set to the subnet address. This is the IP address to which
the DHCP clients on this subnet will forward their outbound traffic. Clarisa fills in the DNS
Server addresses that corporate has specified. This will also be supplied to the DHCP
clients. The DHCP Lease Time is the time an IP address will remain assigned to a client
after there is no more activity. She leave it at the default and clicks Ok to save her changes.
Then, in the subnet screen, she clicks Apply to save her overall changes.
Now she will configure the printer subnet.
Configuring the Printer Subnet
Clarisa selects the second subnet from the list of LAN menu items in the left menu.
She renames this subnet “Printsn”, and then gives it an IP address
of 192.168.1.1 and a
subnet mask of 255.255.255.0. The only devices on this subnet are the wireless printers.
Using the Interfaces section of the screen, she associates the second WLAN with this
subnet. She activates the DHCP server with an IP address range of 192.168.1.11 to
192.168.1.254.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved
93
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004