Symbol Technologies WS 2000 - Manual (Page 82)

System Administration
Transmitted
Field
Description
TX Errors
The total number of errors including dropped data packets, buffer
overruns, and carrier errors that fail on outbound traffic
TX Dropped The number of data packets that fail to get sent from the subnet
TX Overruns
The total number of buffer overruns (when packets are sent faster than
the subnet can handle them)
TX Carrier The total number of TCP/IP data carrier errors received
Interfaces
The interfaces section of the screen displays information about the ports and Access Ports
associated with the subnet (set in Network Configuration --> Subnet --> <Subnet
Name>).
The area shows the status of the port-subnet link and the speed of the connection. The Link
field displays “Up” if the adjacent port is active, and “Down” if the adjacent port is inactive.
The area also shows the status of the port-WLAN associations. In this case, the adopted
Access Ports for each of the associated WLANs are listed.
WAN Statistics
The WS 2000 Network Management System provides a set of screens that allow the
administrator to view real-time statistics for monitoring the switch’s activity. One of those
screens displays statistics for the Wide Area Network (WAN) port. Selecting Status &
Statistics --> WAN Stats displays the following screen.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 82
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004