Symbol Technologies WS 2000 - Manual (Page 77)

System Administration
Setup AirBEAM Software Access
Symbol’s AirBEAM software suite is a comprehensive set of mobility management tools
that maximize the availability, security and effectiveness of a wireless network. The fields
in this section of the screen allow the administrator to enable access from the AirBEAM
software suite and to set the AirBEAM password.
1. To enable AirBEAM access, check the Enable AirBEAM checkbox.
2. Specify a password for AirBEAM software access. Note that the AirBEAM login name
is always “airbeam”.
3. Click the Apply button to save changes.
Changing the Administrator and Manager Passwords
In the lower half of the WS 2000 Access screen, two buttons open sub-screens that allow
the administrator to change either the switch administrator’s or switch manager’s
passwords. For reasons of security, the administrator should change both passwords to
something other than the default, before the system becomes operational.
• Select Change Admin Password to open the screen to change the switch
administrator’s password. Type in the current administrator password and the new
password twice.
• Select Change Manager Password to open the screen to change the manager’s
password. Type in the current administrator password and the new manager passwords
twice.
Note: If the administrator does not remember the current password, the
administrator can contact Symbol Technical Support for directions on
how to proceed.
Statistics and Logs
Access Port Statistics
The WS 2000 Network Management System provides a screen that displays basic access
port information, as well as real-time statistics about the activity on each Access Port and its
associated units. To see statistics about a particular Access Port, select Status &
Statistics --> Access Port --> <Access Port Name>
from the left menu.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 77
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004