Symbol Technologies WS 2000 - Manual (Page 99)

Retail Use Cases
After she makes this selection a new button appears, labeled 1 to Many Mappings. She
selects the 1 to Many Mappings button:
If Clarisa had more than one static IP address, she would have been able to assign several to
the WAN interface. This screen is used to choose how the internal IP addresses on each
subnet translated into the selection of external IP addresses. However, she has only one
external IP address. All requests from any IP address on the store network are translated
into a request using the single public IP address for the store.
Clarisa clicks the Ok button to confirm the Outbound Mappings and then clicks the Apply
button in the main screen to confirm the NAT choices and save her choices on the switch.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 99
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004