Symbol Technologies WS 2000 - Manual (Page 34)

Step 6: Configure WLAN Security
4. When finished, click the OK button to close this screen.
5. Specify a Pass Key and click the Generate button. The pass key can be any
alphanumeric string. The switch, other proprietary routers, and Symbol cards in mobile
units (MUs) use an algorithm to convert an ASCII string to the same hexadecimal
number, but this conversion is not required for a wireless connection.
6. Use the Key #1-4 fields to specify key numbers that use 26 hexadecimal characters.
Select one of these keys for active use by selecting its radio button.
7. Click the Apply button on the WLAN Security screen to save changes.
Configuring WPA-TKIP
EncryptionWi-Fi Protected Access (WPA) is specified in the IEEE Wireless Fidelity (Wi-
Fi) standard, 802.11i. This security standard provides more sophisticated data encryption
than WEP. WPA is designed for corporate networks and small-business environments
where more wireless traffic allows quicker discovery of encryption keys by an unauthorized
person.
WPA’s encryption method is Temporal Key Integrity Protocol (TKIP). TKIP addresses
WEP weaknesses with a re-keying mechanism, a per-packet mixing function, a message
integrity check, and an extended initialization vector. WPA also provides strong user
authentication that is based on 802.1x EAP.
1. Select the WPA-TKIP radio button to enable Wi-Fi Protected Access (WPA) with
Temporal Key Integrity Protocol (TKIP).
2. To use WPA-TKIP encryption with 802.1x EAP authentication or the No
Authentication selection, click the WPA-TKIP Settings button to display a sub-
screen for key and key rotation settings.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 34
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004